pub struct UnboundedSender<T>(_);
Expand description
The transmission end of an unbounded mpsc channel.
This value is created by the unbounded
function.
Implementations
Check if the channel is ready to receive a message.
Returns whether this channel is closed without needing a context.
Closes this channel from the sender side, preventing any new messages.
Disconnects this sender from the channel, closing it if there are no more senders left.
Send a message on the channel.
This method should only be called after poll_ready
has been used to
verify that the channel is ready to receive a message.
Sends a message along this channel.
This is an unbounded sender, so this function differs from Sink::send
by ensuring the return type reflects that the channel is always ready to
receive messages.
Returns whether the senders send to the same receiver.
Returns whether the sender send to this receiver.
Hashes the receiver into the provided hasher
Trait Implementations
pub fn poll_ready(
self: Pin<&mut UnboundedSender<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_ready(
self: Pin<&mut UnboundedSender<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
Attempts to prepare the Sink
to receive a value. Read more
pub fn start_send(
self: Pin<&mut UnboundedSender<T>>,
msg: T
) -> Result<(), <UnboundedSender<T> as Sink<T>>::Error>
pub fn start_send(
self: Pin<&mut UnboundedSender<T>>,
msg: T
) -> Result<(), <UnboundedSender<T> as Sink<T>>::Error>
Begin the process of sending a value to the sink.
Each call to this function must be preceded by a successful call to
poll_ready
which returned Poll::Ready(Ok(()))
. Read more
pub fn poll_flush(
self: Pin<&mut UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_flush(
self: Pin<&mut UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
Flush any remaining output from this sink. Read more
pub fn poll_close(
self: Pin<&mut UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_close(
self: Pin<&mut UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <UnboundedSender<T> as Sink<T>>::Error>>
Flush any remaining output and close this sink, if necessary. Read more
pub fn poll_ready(
self: Pin<&mut &'_ UnboundedSender<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_ready(
self: Pin<&mut &'_ UnboundedSender<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
Attempts to prepare the Sink
to receive a value. Read more
pub fn start_send(
self: Pin<&mut &'_ UnboundedSender<T>>,
msg: T
) -> Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>
pub fn start_send(
self: Pin<&mut &'_ UnboundedSender<T>>,
msg: T
) -> Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>
Begin the process of sending a value to the sink.
Each call to this function must be preceded by a successful call to
poll_ready
which returned Poll::Ready(Ok(()))
. Read more
pub fn poll_flush(
self: Pin<&mut &'_ UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_flush(
self: Pin<&mut &'_ UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
Flush any remaining output from this sink. Read more
pub fn poll_close(
self: Pin<&mut &'_ UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
pub fn poll_close(
self: Pin<&mut &'_ UnboundedSender<T>>,
&mut Context<'_>
) -> Poll<Result<(), <&'_ UnboundedSender<T> as Sink<T>>::Error>>
Flush any remaining output and close this sink, if necessary. Read more
Auto Trait Implementations
impl<T> !RefUnwindSafe for UnboundedSender<T>
impl<T> Send for UnboundedSender<T> where
T: Send,
impl<T> Sync for UnboundedSender<T> where
T: Send,
impl<T> Unpin for UnboundedSender<T>
impl<T> !UnwindSafe for UnboundedSender<T>
Blanket Implementations
Mutably borrows from an owned value. Read more
Composes a function in front of the sink. Read more
fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>,
fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>,
Composes a function in front of the sink. Read more
Transforms the error returned by the sink.
Map this sink’s error to a different error type using the Into
trait. Read more
Adds a fixed-size buffer to the current sink. Read more
Close the sink.
Fanout items to multiple sinks. Read more
Flush the sink, processing all pending items. Read more
A future that completes after the given item has been fully processed into the sink, including flushing. Read more
A future that completes after the given item has been received by the sink. Read more
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
Wrap this sink in an Either
sink, making it the left-hand variant
of that Either
. Read more
Wrap this stream in an Either
stream, making it the right-hand variant
of that Either
. Read more
A convenience method for calling Sink::poll_ready
on Unpin
sink types. Read more
A convenience method for calling Sink::start_send
on Unpin
sink types. Read more
A convenience method for calling Sink::poll_flush
on Unpin
sink types. Read more