Struct gimli::read::LineSequence

source · [−]

pub struct LineSequence<R: Reader> {
    pub start: u64,
    pub end: u64,
    /* private fields */
}

Expand description

A sequence within a line number program. A sequence, as defined in section 6.2.5 of the standard, is a linear subset of a line number program within which addresses are monotonically increasing.

Fields

start: u64

The first address that is covered by this sequence within the line number program.

end: u64

The first address that is not covered by this sequence within the line number program.

Trait Implementations

source

impl<R: Clone + Reader> Clone for LineSequence<R>

source

fn clone(&self) -> LineSequence<R>

Returns a copy of the value. Read more

1.0.0 · source

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

source

impl<R: Debug + Reader> Debug for LineSequence<R>

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations

impl<R> RefUnwindSafe for LineSequence<R> where
R: RefUnwindSafe,

impl<R> Send for LineSequence<R> where
R: Send,

impl<R> Sync for LineSequence<R> where
R: Sync,

impl<R> Unpin for LineSequence<R> where
R: Unpin,

impl<R> UnwindSafe for LineSequence<R> where
R: UnwindSafe,

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

pub fn from(t: T) -> T

Performs the conversion.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

pub fn into(self) -> U

Performs the conversion.

source

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

source

pub fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

source

pub fn clone_into(&self, target: &mut T)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct gimli::read::LineSequence

Fields

Trait Implementations

impl<R: Clone + Reader> Clone for LineSequence<R>

fn clone(&self) -> LineSequence<R>

fn clone_from(&mut self, source: &Self)

impl<R: Debug + Reader> Debug for LineSequence<R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Auto Trait Implementations

impl<R> RefUnwindSafe for LineSequence<R> where
R: RefUnwindSafe,

impl<R> Send for LineSequence<R> where
R: Send,

impl<R> Sync for LineSequence<R> where
R: Sync,

impl<R> Unpin for LineSequence<R> where
R: Unpin,

impl<R> UnwindSafe for LineSequence<R> where
R: UnwindSafe,

Blanket Implementations

impl<T> Any for T where
T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where
T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where
T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where
U: From<T>,

pub fn into(self) -> U

impl<T> ToOwned for T where
T: Clone,

type Owned = T

pub fn to_owned(&self) -> T

pub fn clone_into(&self, target: &mut T)

impl<T, U> TryFrom<U> for T where
U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Struct gimli::read::LineSequence

Fields

Trait Implementations

impl<R: Clone + Reader> Clone for LineSequence<R>

fn clone(&self) -> LineSequence<R>

fn clone_from(&mut self, source: &Self)

impl<R: Debug + Reader> Debug for LineSequence<R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Auto Trait Implementations

impl<R> RefUnwindSafe for LineSequence<R> where R: RefUnwindSafe,

impl<R> Send for LineSequence<R> where R: Send,

impl<R> Sync for LineSequence<R> where R: Sync,

impl<R> Unpin for LineSequence<R> where R: Unpin,

impl<R> UnwindSafe for LineSequence<R> where R: UnwindSafe,

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

pub fn to_owned(&self) -> T

pub fn clone_into(&self, target: &mut T)

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<R> RefUnwindSafe for LineSequence<R> where
R: RefUnwindSafe,

impl<R> Send for LineSequence<R> where
R: Send,

impl<R> Sync for LineSequence<R> where
R: Sync,

impl<R> Unpin for LineSequence<R> where
R: Unpin,

impl<R> UnwindSafe for LineSequence<R> where
R: UnwindSafe,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,