#[repr(transparent)]
pub struct BitPos<R> where
    R: BitRegister
{ /* private fields */ }
Expand description

An electrical position counter within a register element R.

This type is a counter in the ring 0 .. R::BITS, and serves to mark an electrical address of a real bit. It is the shift distance in the expression 1 << n. It is only produced by applying a BitOrder::at transformation to some BitIdx produced by this library.

Type Parameters

  • R: The register element that this position governs.

Validity

Values of this type are required to be in the range 0 .. R::BITS. Any value not less than R::BITS makes the program invalid, and will likely cause a crash. In addition, BitOrder::at has a list of requirements that its implementations must uphold in order to make construction of this type semantically correct in a program.

Construction

This type is publicly constructible. bitvec will only request its creation by calling BitOrder::at, and has no sites that can publicly accept untrusted values.

Implementations

Wraps a counter value as a known-good position within an R register.

Parameters
  • value: The counter value to mark as a position. This must be in the range 0 .. R::BITS.
Returns

This returns Some(value) when it is in the valid range 0 .. R::BITS, and None when it is not.

Wraps a counter value as an assumed-good position within an R register.

Parameters
  • value: The counter value to mark as a position. This must be in the range 0 .. R::BITS.
Returns

This returns value, marked as a valid position.

Safety

If the value is outside the valid range, then the program is incorrect. Debug builds will panic; release builds do not inspect the value.

Removes the position wrapper, leaving the internal counter.

Computes the bit selector corresponding to self.

This is always 1 << self.pos.

Computes the bit selector for self as an accessor mask.

This is a type-cast over Self::select.

Trait Implementations

Formats the value using the given formatter.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Returns the “default value” for a type. Read more

Formats the value using the given formatter. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Converts self into T using Into<T>. Read more

Converts self into a target type. Read more

Causes self to use its Binary implementation when Debug-formatted.

Causes self to use its Display implementation when Debug-formatted. Read more

Causes self to use its LowerExp implementation when Debug-formatted. Read more

Causes self to use its LowerHex implementation when Debug-formatted. Read more

Causes self to use its Octal implementation when Debug-formatted.

Causes self to use its Pointer implementation when Debug-formatted. Read more

Causes self to use its UpperExp implementation when Debug-formatted. Read more

Causes self to use its UpperHex implementation when Debug-formatted. Read more

Performs the conversion.

Performs the conversion.

Pipes by value. This is generally the method you want to use. Read more

Borrows self and passes that borrow into the pipe function. Read more

Mutably borrows self and passes that borrow into the pipe function. Read more

Borrows self, then passes self.borrow() into the pipe function. Read more

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

Borrows self, then passes self.as_ref() into the pipe function.

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

Borrows self, then passes self.deref() into the pipe function.

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

Immutable access to a value. Read more

Mutable access to a value. Read more

Immutable access to the Borrow<B> of a value. Read more

Mutable access to the BorrowMut<B> of a value. Read more

Immutable access to the AsRef<R> view of a value. Read more

Mutable access to the AsMut<R> view of a value. Read more

Immutable access to the Deref::Target of a value. Read more

Mutable access to the Deref::Target of a value. Read more

Calls .tap() only in debug builds, and is erased in release builds.

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

Provides immutable access for inspection. Read more

Calls tap in debug builds, and does nothing in release builds.

Provides mutable access for modification. Read more

Calls tap_mut in debug builds, and does nothing in release builds.

Provides immutable access to the reference for inspection.

Calls tap_ref in debug builds, and does nothing in release builds.

Provides mutable access to the reference for modification.

Calls tap_ref_mut in debug builds, and does nothing in release builds.

Provides immutable access to the borrow for inspection. Read more

Calls tap_borrow in debug builds, and does nothing in release builds.

Provides mutable access to the borrow for modification.

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

Immutably dereferences self for inspection.

Calls tap_deref in debug builds, and does nothing in release builds.

Mutably dereferences self for modification.

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

Converts the given value to a String. Read more

Attempts to convert self into T using TryInto<T>. Read more

Attempts to convert self into a target type. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.