#[repr(transparent)]pub struct BitSel<R> where
R: BitRegister, { /* private fields */ }
Expand description
A one-hot selection mask for a register element R
.
This type selects exactly one bit in a register. It is used to apply test and write operations into memory.
Type Parameters
R
: The register element this selector governs.
Validity
Values of this type are required to have exactly one bit set high, and all others set low.
Construction
This type is only constructed from the BitPos::select
and
BitOrder::select
functions. It is always equivalent to
1 << BitPos::unwrap
.
The chain of custody, from known-good BitIdx
values, through proven-good
BitOrder
implementations, into BitPos
and then BitSel
, proves that
values of this type are always correct to apply to underlying memory.
Implementations
Wraps a counter value as a known-good selection of an R
register.
Parameters
value
: A one-hot selection mask of a bit in anR
register.
Returns
If value
is a power of two (exactly one bit set high and all others
set low), it returns Some
of a BitSel
wrapping the value
.
Wraps a counter value as an assumed-good selection of an R
register.
Parameters
value
: A one-hot selection mask of a bit in anR
register.
Returns
value
wrapped in a BitSel
.
Safety
value
must be a power of two: one bit set high and all others set
low. In debug builds, invalid value
s cause a panic; release builds do
not check the input.
This function must only be called in a BitOrder::select
implementation that is verified to be correct.
pub fn range_all(
) -> impl Iterator<Item = Self> + DoubleEndedIterator + ExactSizeIterator + FusedIterator
pub fn range_all(
) -> impl Iterator<Item = Self> + DoubleEndedIterator + ExactSizeIterator + FusedIterator
Iterates over all possible selector values.
Trait Implementations
This method returns an ordering between self
and other
values if one exists. Read more
This method tests less than (for self
and other
) and is used by the <
operator. Read more
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
Auto Trait Implementations
impl<R> RefUnwindSafe for BitSel<R> where
R: RefUnwindSafe,
impl<R> UnwindSafe for BitSel<R> where
R: UnwindSafe,
Blanket Implementations
Mutably borrows from an owned value. Read more
Causes self
to use its Binary
implementation when Debug
-formatted.
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
Mutably borrows self
and passes that borrow into the pipe function. Read more
Borrows self
, then passes self.borrow()
into the pipe function. Read more
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
Borrows self
, then passes self.as_ref()
into the pipe function.
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
Borrows self
, then passes self.deref()
into the pipe function.
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
Immutable access to the Borrow<B>
of a value. Read more
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
Calls .tap_deref()
only in debug builds, and is erased in release
builds. Read more
Provides immutable access to the reference for inspection.
Calls tap_ref
in debug builds, and does nothing in release builds.
Provides mutable access to the reference for modification.
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
Provides immutable access to the borrow for inspection. Read more
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.