pub struct WithdrawReasons { /* private fields */ }
Expand description

Reasons for moving funds out of an account.

Implementations

In order to pay for (system) transaction costs.

In order to transfer ownership.

In order to reserve some funds for a later return or repatriation.

In order to pay some other (higher-level) fees.

In order to tip a validator for transaction inclusion.

Returns an empty set of flags.

Returns the set containing all flags.

Returns the raw value of the flags currently stored.

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

Returns true if no flags are currently stored.

Returns true if all flags are currently set.

Returns true if there are flags common to both self and other.

Returns true if all of the flags in other are contained within self.

Inserts the specified flags in-place.

Removes the specified flags in-place.

Toggles the specified flags in-place.

Inserts or removes the specified flags depending on the passed value.

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Choose all variants except for one.

assert_eq!(
	WithdrawReasons::FEE | WithdrawReasons::TRANSFER | WithdrawReasons::RESERVE | WithdrawReasons::TIP,
	WithdrawReasons::except(WithdrawReasons::TRANSACTION_PAYMENT),
	);

Trait Implementations

Formats the value using the given formatter.

Returns the intersection between the two sets of flags.

The resulting type after applying the & operator.

Disables all flags disabled in the set.

Returns the union of the two sets of flags.

The resulting type after applying the | operator.

Adds the set of flags.

Returns the left flags, but with all the right flags toggled.

The resulting type after applying the ^ operator.

Toggles the set of flags.

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Attempt to deserialise the value from input.

Attempt to skip the encoded value from input. Read more

Returns the fixed encoded size of the type. Read more

Convert self to a slice and append it to the destination.

Convert self to an owned vector.

Convert self to a slice and then invoke the given closure with it.

If possible give a hint of expected size of the encoding. Read more

Calculates the encoded size. Read more

Extends a collection with the contents of an iterator. Read more

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements. Read more

Creates a value from an iterator. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

Formats the value using the given formatter.

Returns the complement of this set of flags.

The resulting type after applying the ! operator.

Formats the value using the given formatter.

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Returns the set difference of the two sets of flags.

The resulting type after applying the - operator.

Disables all flags enabled in the set.

Formats the value using the given formatter.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Convert from a value of T into an equivalent instance of Option<Self>. Read more

Consume self to return Some equivalent value of Option<T>. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and consume all of the given input data. Read more

Decode Self and advance input by the number of bytes consumed. Read more

Decode Self with the given maximum recursion depth. Read more

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait. Read more

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait. Read more

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s. Read more

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s. Read more

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait. Read more

Performs the conversion.

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

Performs the conversion.

Get a reference to the inner from the outer.

Get a mutable reference to the inner from the outer.

Return an encoding of Self prepended by given slice.

Should always be Self

Convert from a value of T into an equivalent instance of Self. Read more

Consume self to return an equivalent value of T. Read more

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The counterpart to unchecked_from.

Consume self to return an equivalent value of T.

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more